Epson STYLUS PHOTO 895 Manual page 49

Proof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname
Note:
Do not select Sheet Feeder as the Paper Source setting in the printer
software when roll paper is loaded in the sheet feeder. Doing so
causes unnecessary paper to be fed after each print job. If you have
already started printing, cancel the print job from the printer
software referring to "Cancelling Printing" on page 10-28. Wait
until the printer stops printing and feeding paper. Cut off the paper
at the back of the printer, then turn off the printer. The remaining
paper is ejected.
4. Make the Roll Paper Option settings at the bottom of the
dialog box.
The Roll Paper Option settings are as follows:
Banner Mode
Cut Sheet Mode
Save roll paper
R4C706
long.bk
A5 size
7/19/01
Select this mode when you want to print multi-
page data as continuous data on the roll
paper, rather than as individual pages. When
this check box is selected, the Save Roll Paper
check box is enabled.
Select this mode when you want to print multi-
page data as individual pages, rather than as
continuous data. When this check box is
selected, the Print page frame check box is
enabled.
Select this check box when you do not want
any paper to be fed after the data is printed.
This feature is only available when Banner
Mode is selected.
Using Roll Paper
R
Rev. C
ROLL.FM
4-17