Epson STYLUS PHOTO 895 Manual page 136

L R4C706
long.bk
A5 size
7/19/01
For Macintosh users
9-6
Rev. C
MAINT.FM
In the check pattern, if you find that any segments are missing
from the test lines, you may need to repeat the head cleaning and
print the nozzle check pattern again.
If print quality hasn't improved after repeating this procedure
four or five times, turn the printer off and leave it alone overnight,
then try head cleaning again.
If the print quality still has not improved, one or both of your ink
cartridges may be old or damaged and may need to be replaced.
To replace an ink cartridge before it is empty, see "Replacing Ink
Cartridges" on page 8-1.
If print quality remains a problem after replacing the ink
cartridges, contact your dealer.
Note:
To maintain print quality, we recommend turning on the printer for at
least one minute every month.
Follow the steps below to clean the print head using the Head
Cleaning utility.
1. Make sure that the printer is on and the
2. Access the printer software and click the
button, then click the Head Cleaning button.
3. Follow the on-screen instructions.
The process light will flash while the printer performs the
cleaning cycle. This operation takes about thirty seconds to
complete.
Caution:
c
Never turn off the printer while the process light is flashing.
Doing so may damage the printer.
Maintenance
Proof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname
b
error light is off.
Utility icon