Epson STYLUS PHOTO 895 Manual page 36

L R4C706
long.bk
A5 size
7/19/01
3-4
Rev. C
PAPER.FM
If you want to print on the reverse side of an Ink Jet Card with
Maximum selected as the Printable Area setting, flatten the
card or curl it slightly in the opposite direction before loading.
If ink smears on your documents when printing on thick
media, set the adjust lever to the + position. To change the
setting, position the lever as shown in the illustration below.
Note:
Return the adjust lever to the 0 position before printing on
media of normal thickness. Leaving the lever in the + position
may cause gaps in the printed image.
When the adjust lever is in the + position, make sure the High
Speed setting in the printer driver's Advanced dialog box is off.
To turn this option off, you may also need to change the Print
Quality setting or align the print head using the Print Head
Alignment utility.
If you wish to print on the reverse side of an Ink Jet Card with
Maximum selected as the Printable Area setting, flatten the
cards or curl them slightly in the opposite side before loading.
Set the adjust lever to the + position before printing.
Paper Handling
Proof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname