Epson STYLUS PHOTO 895 Manual page 138

L R4C706
long.bk
A5 size
7/19/01
9-8
Rev. C
MAINT.FM
b
2. Hold down the
The printer will start cleaning the print head and the process
light will begin flashing. Print head cleaning takes about
thirty seconds to complete.
Caution:
c
Never turn off the printer while the process light is flashing.
Doing so may damage the printer.
3. When the process light stops flashing, print a nozzle check
pattern to confirm that the head is clean and to reset the
cleaning cycle.
If print quality has not improved after repeating this procedure
four or five times, turn the printer off and leave it alone overnight,
then try head cleaning again.
If the print quality still has not improved, one or both of your ink
cartridges may be old or damaged and may need to be replaced.
To replace an ink cartridge before it is empty, see "Replacing Ink
Cartridges" on page 8-1.
If print quality remains a problem after replacing the ink
cartridges, contact your dealer.
Note:
To maintain print quality, we recommend turning on the printer for at
least one minute every month.
Maintenance
Proof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname
maintenance button for three seconds.