Global Outputs Switch; Sequence State Switch - Keysight MIPI M-PHY User Manual

Global Outputs Switch

Sequence State Switch

Keysight MIPI M-PHY Frame Generator User Guide
Once all parameters have been set, you have to click the Apply Icon to
apply the parameter values to the instrument. Then the Global Outputs
switch changes to ON and the progress bar to the left will turn green,
orange or red, depending on whether any problems have been
encountered. A description of any problem found will appear in the log
window.
If you set the Sequence State switch to ON, another parameter field opens
to the right that shows the current state of the setup. For example, if the
first block of the sequence is "1. Sleep", the Sequence State might show
"1. Sleep", so you know which block of the sequence has been reached.
If the setup is running offline, "not available" appears in the parameter
field.
The Sequence State switch changes to ON automatically when you click
the Apply Icon.
Using the Software 5
59