Functional Description; Safety Instructions; Symbols In The Manual; Symbols On The Trimmer - Grizzly ERT 600 R Translation Of The Original Instructions For Use

4 Strain relief
5 Additional handle
6 Knurled nut and screw
7 Handle rod
8 Clamp for handle section
(length) adjustment
9 Telescopic tube
10 Chassis adjustment
11 Chassis
12 Motor head
13 Bar for tilt angle adjustment
14 Protective cover
15 Cutter head with line spool or
cutting thread
16 Spacing bow (flower protection)
17 Castor roll
18 Cord cutter (not visible)
19 Receptor for spare spool

Functional description

The portable, hand-guided lawn trimmer is
powered by an electric motor. The trimmer
features a dual line spool as the cutting
device.
For grass trimming there are two nylon
threads rotating parallel with the ground
or, for vertical edge trimming, roughly per-
pendicular to the ground.
The following describes the functions of
the operating parts.

Safety instructions

Before starting to use the
appliance you should know
and understand all its parts.
Practice using the appliance
and have an experienced
user or expert explain its
functionality, method of op-
eration and best practices to
you. Make sure you can im-
mediately shut off the appli-
ance in case of emergency.
Improper use of the appli-
ance may cause serious
injury.

Symbols in the manual

Warning symbols with in-
formation on damage and
injury prevention.
Instruction symbols (the
instruction is explained at
the place of the exclamation
mark) with information on
preventing damage.
Help symbols with informa-
tion on improving tool han-
dling.

Symbols on the trimmer

Caution!
Read the operating instruc-
tions carefully.
Wear eye and ear protection
Do not expose the equip-
ment to the damp. Do not
work in the rain and do not
cut wet grass.
The cutting head will
continue to rotate for
a few seconds after
the equipment has
been switched off. Keep hands
and feet well away.
Risk of injury from parts be-
ing thrown up.
GB
19