Leica RTC360 User Manual page 29

Operation with hand-
held device connec-
tion
step-by-step
Connecting to a hand-
held device
step-by-step
Operation
Do not touch or move the instrument while the system is recording.
☞
1 s
1
16241_002
1. Press the power button to turn on the instrument.
2. The instrument is starting. The power button is blinking green and
the LED indicator is blinking yellow.
3. When the user interface is visible, the instrument is ready for opera-
tion.
The power button and the LED indicator are now continuously
green.
4. Connect the handheld device with the instrument.
5. Start the recording and simultaneous data transfer with the hand-
held device.
6. Start the processing of data on the handheld device.
1. Start the instrument and wait until the user interface is visible.
2. On the handheld device select Settings and tap WLAN.
3. Select the network RTC360-298xxxx/RTC360LT-3005xxx in the
WLAN settings to be connected.
☞
The number 298xxxx/3005xxx is the serial number of the
instrument.
4. Enter the password.
☞
The instrument specific password is printed on the type
label in the battery compartment, for example "test1111".
2
Connect
5
3
4
6
29