Leica RTC360 User Manual page 37

Operation
Element
Language
upload
Firmware ☞
upgrade
Transfer of
logfiles
☞
Check &
Adjust
☞
Description
1.
2.
3.
4.
A language can be activated dir-
ectly after upload. A confirma-
tion message will be displayed.
Tap YES to activate the lan-
guage.
Tap NO to keep the current lan-
guage.
A firmware upgrade can take up to 30 minutes.
Make sure that you have got sufficient battery
power or provide AC power. Do not interrupt
power supply during the upgrade process.
1.
2.
3.
4.
5.
When the upgrade is complete
the instrument is restarted.
1.
2.
A transfer of logfiles can take up to 5 minutes.
When the transfer is complete a message is dis-
played.
Tap Start to start the Check &
Adjust procedure.
Before performing the Check & Adjust, read the
separate RTC360/RTC360 LT Check & Adjust User
Manual.
Copy the language file (*.qm)
to the Languages directory
on the USB stick.
Attach the USB stick to the
instrument.
Tap the double arrow and
select the language file from
the drop-down list.
Tap Upload.
Copy the firmware file (*.fw)
to the root directory on the
USB stick.
Attach the USB stick to the
instrument.
Tap the double arrow and
select the firmware file from
the drop-down list.
Tap Upgrade.
Accept the Leica Geosys-
tems Software Licence
Agreement to start the
upgrade process.
Attach the USB stick to the
instrument.
Tap Transfer in order to
export logfiles (*.logs) to
the Logs directory on the
USB stick.
37