Electromagnetic Compatibility (Emc) - Leica RTC360 User Manual

Labelling
1.7
Description
Safety Directions
Description
Minimal base rotation speed
RTC360
360°
0°
16139_006
a Laser beam
b Vertical laser scanning area
c Horizontal laser scanning area
RTC360 LT
360°
0°
19617_003
a Laser beam
b Vertical laser scanning area
c Horizontal laser scanning area

Electromagnetic Compatibility (EMC)

The term Electromagnetic Compatibility is taken to mean the capability of the
product to function smoothly in an environment where electromagnetic radi-
ation and electrostatic discharges are present, and without causing electro-
magnetic disturbances to other equipment.
RTC360
5 mHz
90°
0°
a
360°
60°
60°
90°
0°
a
360°
60°
60°
RTC360 LT
2.5 mHz
b
Model: RTC360
Art. No.: 838300
S.No.: 2980001
Equip. No.: 1234567
WLAN PW: 12345678
Power : 24V 75W max.
Leica Geosystems AG
CH-9435 Heerbrugg
Manufactured: 01.2018
Made in Switzerland
This device contains:
FCC ID: N6C-SXPCEAN2
IP54
IC: 4608A-SPCEAN2
Complies with 21 CFR 1040.10 and 1040.11 except for
conformance with IEC 60825-1 Ed. 3., as described in Laser
Notice No. 56, dated May 8, 2019.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this
device must accept any interference received, including
c
interference that may cause undesired operation.
Class 1 Laser Product
according to IEC
60825-1
(2014-05)
b
Model: RTC360 LT
Art. No.: 877118
S.No.: 3005001
Equip. No.: 1234567
WLAN PW: 12345678
Power : 24V 75W max.
Leica Geosystems AG
CH-9435 Heerbrugg
Manufactured: 08.2019
Made in Switzerland
This device contains:
FCC ID: N6C-SXPCEAN2
IP54
IC: 4608A-SPCEAN2
Complies with 21 CFR 1040.10 and 1040.11 except for
conformance with IEC 60825-1 Ed. 3., as described in Laser
Notice No. 56, dated May 8, 2019.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this
device must accept any interference received, including
c
interference that may cause undesired operation.
Class 1 Laser Product
according to IEC
60825-1
(2014-05)
13