S2 - Record Bypass Switch
•
Switch 8 - used to enable recording of digital voice message.
OFF = Recording not permitted, Trouble Silence/Rec key used for trouble silence (factory default)
setting)
ON = Recording permitted, Trouble Silence/Rec key used to record voice message. Switch must be
restored to default setting upon completion of recording.
2.3
S2 - Record Bypass Switch
This switch, when placed in the down position, prevents accidental erasure of stored voice messages. See "Operating
Instructions" on page 32 for additional information.
18
Technical Manuals Online! - http://www.tech-man.com
UP Position = The stored digital voice message may be overwritten with a new one.
Down Position = The stored digital voice message can not be overwritten (factory
default setting).
Document #50580
firealarmresources.com
Rev.C
8/12/97
P/N 50580:C