Table of Contents
Advertisement
Installing Option Modules
Insert the two standoffs (provided) into the holes located on the right-side edge of the main board. Carefully
align the pins on the main board with J1 and/or J2 on the option board. Insert screw through the option board
until it is secured on the standoffs. Affix the terminal identification labels provided with the option modules
as shown below.
(Part # 42050)
Standoffs
Option Board
Main
Board
Figure 3.6-2: Installing Option Modules
MS-4412B/MS-4424B 15125:F1 06/24/97
21
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com
Advertisement
Table of Contents
