Valcom PagePac 6 Plus Manual page 7

Setting Options
To select the desired option, dial the code shown.
1. Pick up the telephone and listen for PagePac 6 Plus dial tone
(on key systems, select the desired line first).
2. Dial the number for the option desired (see Table 2 or the simplified user guide supplied), and listen
for program tone (two short tones).
3. Replace the receiver.
Note: If you hear reorder tone (fast busy tone), a dialing error has been made. Hang up and start over.
Table 2 is also on the bottom of the PagePac 6 Plus chassis.
Confirmation tone - OFF*
Confirmation tone - ON
Music in Zone 1 - ON
Music in Zone 2 - ON
Music in Zone 3 - ON
Music in all zones - OFF*
Talkback on Line 1 - OFF
Talkback on LIne 2 - OFF
Talkback on Lines 1 and 2 - ON*
Talkback in Zone 1 - OFF
Talkback in Zone 2 - OFF
Talkback in Zone 3 - OFF
Talkback in all zones - ON*
Initial talkback Warning Tone - OFF**
Repetitive talkback Warning Tone - OFF*
Both talkback Warning Tones - ON*
Time between Repetitive tones - 15 seconds
Time between Repetitive tones - 30 seconds*
All-zone paging - OFF
All-zone paging - ON*
Automatic Outside Line Access
LINE 1
LINE 2
* Indicates the default or factory-set condition for each option. If power goes off, all
options are reset to their default values.
** Check local regulations before shutting off either the Initial or Repetitive
talkback warning tones.
Technical Manuals Online! - http://www.tech-man.com Technical Manuals Online! - http://www.tech-man.com
Table 2. Programming Options
Option
OFF
2 sec.
4 sec.*
10 sec.
OFF
2 sec.
4 sec.*
10 sec.
firealarmresources.com
7
Dial Code
834
835
811
812
813
814
891
892
893
821
822
823
824
831
832
833
841
842
851
852
861
862
863
864
865
866
867
868
947182