Transportation And Storage Conditions - Field Controls Trio Plus User Manual

Problem Possible Causes
The ambient air quality of
the room is poor.
Inlet and or outlet restricted.
Poor odor
The filters need to be
removal
replaced.
Packaging, padding behind the
lamp, or lamp ties have not
been removed.
The room exceeds the
effective area of the product.
The appliance The air inlet or air outlet is
generates blocked by foreign matter;
abnormal A foreign object has fallen
sound while into the air tube of the
running appliance.
The unit is The sensor cover is dusty;
always The unit operated in a dusty
detecting environment.
high levels of
particles
When the
UVC Lamp Is the filter packaging
is turned on, removed?
there is a dull Are there foreign
sound and objects blocking the air
low airflow outlet or air inlet?
Remedial Action
Open the window to
improve ventilation.
Replace the activated
carbon filter.
Remove the padding
behind the UVC lamps.
Unplug and remove the
object blocking the air
flow; Remove any
foreign objects in the
appliance.
Clean the sensor cover;
Sensor may require
opening and sensor to be
carefully cleaned with a
damp Q-Tip
Adjust the air purifier
operating speed to high
speed.
Remove the filter
package and reinstall it
according to the
Instructions;
Turn off the appliance
and remove the
clogged foreign objects.
Problem Possible Causes
● Time to replace the filters.
● The lamp padding and tie
Outlet
have not been removed.
Smell
● The filter has absorbed too
much odor or smoke.
The above table lists the common problems with this product.
Need Support? Call us at 252 522 3031
Office hours are 8am – 5pm EST.

TRANSPORTATION AND STORAGE CONDITIONS

It is recommended that the equipment be transported and stored under the
following conditions:
Ambient Environmental
Temperature Humidity
≤80％ RH
-40℃~+50℃
-40F to 122F
This package includes an air-purifying appliance and an instruction manual.
If parts are missing after unpacking, please contact the after-sales service
staff.
Remedial Action
● The odor gradually
disappears after
running the appliance
for a period.
● Clean or replace the
filters.
● Remove the padding
behind the lamp and
ties at end so lamp.
Atmospheric
Pressure
70~106kPa
10 psi - 15 psi