Safety And Instructions - Xylem Bell & Gossett Technologic IPC Quick Start Up Manual

Technologic IPC Start-Up Genie

1. SAFETY AND INSTRUCTIONS

OVERVIEW
This guide provides necessary information about
safety and a quick reference for installing the
Technologic Intelligent Pump Controller.
NOTE: Refer to the P2003509 Technologic
Intelligent Pump Controller Installation, Operation,
and Maintenance (IOM) Manual (current version) on
the Xylem www.xylem.com/bellgossett website for
complete information.
CAUTION:
Read this manual carefully before installing
and using the product. Improper use
of the product can cause personal injury
and damage to property, and may void
the warranty.
NOTICE:
Save this manual for future reference, and keep it
readily available at the location of the unit.
SAFETY
WARNING:
• The operator must be aware of safety
precautions to prevent physical injury.
• Operating, installing, or maintaining the
unit in any way that is not covered in this
manual could cause death, serious personal
injury, or damage to the equipment. This
includes any modification to the equipment
or use of parts not provided by Xylem. If
there is a question regarding the intended
use of the equipment, please contact a
Xylem representative before proceeding.
• Do not change the service application
without the approval of an authorized Xylem
representative.
CAUTION:
You must observe the instructions contained
in this manual. Failure to do so
could result in physical injury, damage,
or delays.
Safety message levels
About safety messages
It is extremely important that you read, understand,
and follow the safety messages and regulations
carefully before handling the product. They are
published
to help prevent these hazards:
• Personal accidents and health problems
• Damage to the product
• Product malfunction
Bell & Gossett
Definitions
Safety message level
DANGER:
WARNING:
CAUTION:
Electrical
Hazard:
NOTICE:
Qualified personnel
WARNING:
This product is intended to be operated
by qualified personnel only.
• Correct and reliable transport, storage, installation,
operation, and maintenance are required for the
trouble-free and safe operation of the frequency
converter. Only qualified personnel are allowed to
install or operate this equipment.
• Qualified personnel are defined as trained staff, who
are authorized to install, commission, and maintain
equipment, systems, and circuits in accordance with
pertinent laws and regulations. Also, the personnel
must be familiar with the instructions and safety
measures that are described in this document.
• Persons with diminished capacities should not
operate the product unless they are supervised or
have been properly trained by a professional.
• Children must be supervised to ensure that they do
not play on or around the product.
Safety precautions
WARNING:
HIGH VOLTAGE. Frequency converters
contain high voltage when connected to
AC mains. Installation, start-up and
maintenance must be performed by
qualified personnel only. Failure to comply
could result in death or serious injury.
Indication
A hazardous situation
which, if not avoided,
will result in death or
serious injury
A hazardous situation
which, if not avoided,
could result in death or
serious injury
A hazardous situation
which, if not avoided,
could result in minor or
moderate injury
The possibility of
electrical risks if
instructions are not
followed in a proper
manner
• A potential situation
which, if not avoided,
could result in
undesirable conditions
• A practice not related
to personal injury
PAGE 3