Chassis Options - Elan EL-IPD-MTX-8CH Integration Note

C
HASSIS OPTIONS
Next to each chassis in configurator there is a cog you can click which will bring up a pop-up
menu where you can adjust options for the chassis that have been added to the
driver.
The left pop-up window below will be for MTX-8CH, PRE-MSI, and AMP-EXT. The Right is the SSI
Pressing Configure Device will bring up another pop up menu. The MTX-8CH and PRE-MSI have the
same pop-up menu. The Amp-EXT and PRE-SSI do not have as many features so the pop-up window
will be different. Shown below; Left is MTX and MSI, Middle is AMP, and Right is SSI.
Device Name: This will be the name displayed in configurator and viewer. This can be changed to help
identify the chassis.
MCU Network: This allows the user to set the IP, Subnet Mask, Gateway, and DNS for the chassis.
Enable Multicast Transmit: This changes the chassis into multicast mode which allows the chassis to
stream its sources to multiple different chassis at the same time.
7 of 11