Led Operation - Elan EL-IPD-MTX-8CH Integration Note

Enable Low Power Mode: Low power mode forces the chassis to go to sleep after a certain period of
inactivity. When in low power mode the chassis can take up to 20 seconds to wake up and start playing.
When not in low power mode the chassis will reduce power when idle; however, it will quickly wake up
Flash LED Start: This causes the power and status LEDs on the front of the chassis to start blinking to
identify the chassis. (The LED for the SSI is on the back of the chassis)
Flash LED Stop: This stops the LED lights on the chassis from flashing
Sync Device with Configurator: This will cause the system to read the chassis current setup. This can
be helpful if you are having issues with audio.
Update Device Firmware: This will cause the chassis to update to the latest firmware.
Factory Reset Device: This will reset the chassis to factory default settings
Delete Device: This will delete the highlighted chassis from the Multi Chassis driver. Deleting the driver
does not delete the zones associated with the driver. Once a driver has been deleted it is recommended
to remove all of the zones that were associated with the deleted chassis.
LED Brightness: This is a feature specific to the SSI which allows the user to reduce the brightness of the
power LED on the back of the chassis.
LED
OPERATION
8 of 11