Cleaning The Temperature Sensor; Cleaning The Evaporator - V-ZUG UnimaticDry V2000 Operating Instructions Manual

Inserting the front filter / front filter mat
The appliance will not start without the front filter being in place.
▸ Centre the front filter mat 3 in the front fil-
ter 1 so that the edges of the front filter
mat are flush with the front filter.
▸ Put the inner part 2 on the front filter 1.
▸ Put the front filter 1 back into the appli-
ance.
The front filter mat does not have to be dry before being put back.
8.7

Cleaning the temperature sensor

Cleaning interval: When necessary
The appliance will not start without the front filter being in place.
▸ Take out the front filter 1.
▸ Clean the temperature sensor 2 with a
damp cloth.
▸ Insert the front filter 1.
8.8

Cleaning the evaporator

Cleaning interval: As required or with message «A9» / «A11»
The appliance will not start without the front filter being in place.
8 Care and maintenance
3
3
2
2
1
1
1
27