Cleaning The Temperature Sensor; Cleaning The Appliance; Trouble-Shooting; Error Messages - V-ZUG AdoraDry V2000 Operating Instructions Manual

10.5

Cleaning the temperature sensor

Carefully clean the temperature sensor!
1
2
2
10.6

Cleaning the appliance

▸ Wipe the outside of the appliance from time to time with a damp cloth and wipe dry.
11

Trouble-shooting

You may be able to trouble-shoot the following malfunctions yourself. If not, note down
the error message in full (message, F and E numbers) and call Customer Services.
11.1

Error messages

Display
A0 Check outlet
A3 Clean mois-
ture sensor
▸ Open the appliance door and remove the front grille 1.
▸ Clean the temperature sensor 2 with a damp cloth.
▸ Put back the front grille 1.
Possible cause
▪ The drain hose is
blocked, kinked or
defective.
▪ The pumping height
of the drain hose is
too high (>1.2 m).
▪ The appliance is con-
nected to a con-
cealed double drain
trap.
▪ The moisture sensor
is dirty or wet.
Solution
▸ Check part of drain hose that is not
housed in appliance.
▸ Press the button.
▸ Restart the programme.
▸ Clean moisture sensor and then wipe dry
(see page 26).
▸ Press the button.
▸ Restart the programme.
11 Trouble-shooting
27