How To Restart Video Door Phone Application - urmet domus IPerCom VOG 7 1761 Configuration Booklet

• Select the required setting or tap the X icon at the top right to close the window without making any
changes.
WARNING! The Panic alarm function requires that:
— the video door phone system has a switchboard;
— the system has been properly set up (for more information, check the Ipercom manual on www.
urmet.com);
— there is a switchboard operator on duty;
— the switchboard operator has been properly trained on what to do in the event that a panic alarm
is received.

1.2.8 How to restart Video Door Phone application

To restart Video Door Phone application, follow the procedure below:
• Switch on the screen by tapping it any point or by pressing the Home button.
• Press the icon to access the Top Page and then the
application.
• Press the icon in the upper right corner to access the video door phone configurations page:
• Scroll through the list and tap the writing Restart. Video Door Phone application will reboot and start
again in few seconds.
DS1761-026
icon for the video door phone
31