urmet domus IPerCom VOG 7 1761 Configuration Booklet page 23

1.2.4.3 Call divert settings
To activate or change the settings for the call diversion function, follow the procedure below:
• Press the Device Mode Settings parameter and then select Call divert settings.
• The screen with the various function settings listed is displayed (the status of each setting is shown
to the right):
– When absent, divert call to: if set, this parameter allows selecting which device to divert a call to:
- relevant exchange,
- all the exchanges in the system,
- a contact in the directory.
ATTENTION! It is possible to divert the call only to a video door phone in the contact directory.
– Waiting time before divert: if set, this parameter allows setting the waiting time within which the call
will be diverted (from 10 to 50 seconds or immediately).
– Automatic divert when busy: if set, this parameter allows diverting the call if the video door phones
in the apartment are busy with another call.
1.2.4.4 Call forwarding settings
The following parameter allows enabling the call forwarding function to receive a call on one or more
smartphones/tablets.
• Press the Device Mode Settings parameter and then select Call forwarding settings.
• The screen with the various settings and parameters of the function is displayed.
DS1761-026
23