Framing; Installation Planning - kozy heat SP-41-L Installation And Operation Manual

3.0 FRAMING

3.1 Installation Planning

• If planning to convert to propane, it is easier to complete the gas
conversion before framing in the fireplace. See the #LCK-SP41L-D
manual for complete conversion instructions. If you convert the
fireplace to propane after fireplace installation, you will have to
remove the control board. See section 8.3, CONTROL BOARD
REMOVAL AND INSTALLATION on page 35 for access to the
control board before and after installation.
3.1.1 Appliance Placement Considerations
WARNING: Due to high temperatures, the appliance should be located
out of traffic and away from furniture and draperies.
• This appliance must be installed on a level surface capable of
supporting the fireplace and venting.
• Determine the exact position of your fireplace. Consider
the hearth width, height, and depth (if applicable) for your
installation.
• If possible, place the fireplace in a position where the vent
terminates between two studs, eliminating the need for any
additional framing.
• Please be aware of the large amount of heat this fireplace will
produce when determining a location.
HUSSONG MFG. CO., INC. KOZY HEAT FIREPLACES
SECTION 3 FRAMING
Installation Planning
11
#SP-41-L
R.6 February 2022