Important; Isolator Switch - Getinge WD15 CLARO Technical Manual

1.1 Important

1.2 Isolator switch

TECHNICAL MANUAL GETINGE WD15 CLARO
• The machine is designed for connection to water only (and for
steam if applicable).
• Read the manual thoroughly before use.
• The machine should only be handled by authorized
personnel. Personnel must also receive regular training.
• Exercise precaution when using the machine, as it uses hot
water and possibly steam.
• Exercise precaution when handling the chemical agent used
in the machine. Follow the instructions for the agent:
if the agent is swallowed, comes into contact with the
o
eyes or skin or if vapors are inhaled.
for instructions on dosing and washing temperatures.
o
for instructions regarding storage and sorting/disposal of
o
packing.
• Make sure that the machine has access to detergent before
the process starts. This is important both for the operation of
the machine and for keeping the washing chamber free from
staining.
• The machine must be kept clean if it is to work properly.
• Do not wash down or hose down the machine with water.
• Installation and service work must be performed by trained
personnel.
• Never bypass the machine's door switch under any
circumstances.
• Leakage in the system, e.g. due to a worn door seal, must be
repaired without delay.
• Spare parts must only be obtained from Getinge's sales
companies.
The machine must have a lockable switch for the electric power
supply. A lockable switch is not included in the delivery scope. The
switch must be easily accessible on a wall close to the machine.
The installation must conform to and be marked in accordance with
local regulations.
1 SAFETY PRECAUTIONS
9 (128)