Signs And Labels; Attention Symbols; Product Liability; Declaration Of Conformity - Getinge WD15 CLARO Technical Manual

1 SAFETY PRECAUTIONS

1.3 Signs and labels

1.3.1 Attention symbols

1.4 Product liability

1.4.1 Declaration of Conformity

1.4.2 Disclaimer

10 (128)
There are warnings, instructions, and advice in this manual that
require extra attention. The symbols and designs used are:
Risk of injuries or machine damage.
This symbol indicates a warning in the manual
concerning the handling of components sensitive
to ESD. The warning applies to damage that may
occur to circuit boards and/or hardware.
Hot surface. Risk of injury.
Live components.
Irritating substances such as acids.
The product compliance is stated in the Declaration of Conformity.
• The manufacturer cannot guarantee that the product will work
as intended if accessories or spare parts other than those
approved by the manufacturer are used.
• The product liability only applies when the instructions in this
manual have been followed in their entirety.
• The manufacturer accepts no responsibility for personal
injuries when the instructions in this manual have not been
followed in their entirety.
• The manufacturer reserves the right to change the
specification and design of the product without any prior
notice.
TECHNICAL MANUAL GETINGE WD15 CLARO