5. Operating Conditions
Software
More than Windows 7 SP1 is needed.
Hardware
The hardware specification is shown below.
Item
CPU
Memory
Resolution
COM Port
Printer
When using a PC for OIS-DS/SMART, there is an item which cannot be used compared with the
standard version (Industrial PC). The items and the restrictions are shown in Table 5.1.
Fan Stop Detection
Temperature Abnormalities
Detection
Hour Worked
Buzzer DIO Inputand Output
UPS Power Failure Signal
Power Supply ON/OFF
by the Initialization Key
Table 5.1 PC Restrictions Conditions
Item
specification
more than Core 2 Duo 2.13GHz
more than 2.0GB
1280×1024 or 7024×768
COM1(8 loop operators keybord)
Use the recommended printer for
TOSDIC-CIE DS
Specifications
No system alarm detection.
No hours-worked display on a system
screen.
Even if it specifies DI/DO processing
with an OIS-DS engineering tool, it
does not operate. (items which OIS-DS
engineering tool specifies: buzzer
output(DIO
specifies)/external
alarm output)
The
UPS
operation
function which used DI signal of a
RAS board is nothing. It supervises
using COM2.
The stop by the shutdown button is
required.
5. Operating Conditions
monitoring
39