Connection Plc Specification - Toshiba TOSDIC-CIE DS Function Manual

Connection PLC Specification

Table 3.4 - 3.9 shows the connection PLC Specification supported by the function of PLC.
Item
Supported Model
Communication System
Collection (input) Data
Write(output) Data
*1) Not supported onWindows 10
About the information of L1, please refer to '6F8C1050 PLC Connection Function L1 Programming
Manual'
Supported Model
Communication System
Collection (input) Data
Write(output) Data
Set Data
Collection(input)
Parameter
L1/LC53* function is registered with the nV-Tool.
Display parameter for L1/LC531 tag is registered with the PLCS engineering tool .
Item
Supported Model
Communication System
Collection (input) Data
Write(output) Data
Set Data
Collection(input)
Parameter
Table 3.4.
Specifications
Integrated Controller L1(model1000, EN531T)
pcmp
PB,PV,LP,R, and W registers
Write in a tag
Table 3.5.
Item
One loop Controller LC531/LC532
Pcmp
PB,PV,LP,R, and W registers
Not used
Not used
Not used
Table 3.6.
Specifications
Integrated controller S2(model2000 EN651A)
pcmp
Max.960 words (use of D register)
It sets up by PLC configuration registration of an PLCS engineering tool.
use of D register
It sets up by tag registration of an engineering tool.
Max.480 words (use of D register)
It sets up by PLC configuration registration of an PLCS engineering tool.
Max.960 words (use of D register)
It sets up by Parameter configuration of an PLCS engineering tool.
Toshiba Integrated Controller L1 *1)
One loop controller LC531/LC532
Specifications
Toshiba Integrated Controller S2
3. Basic Specification
33