Table of Contents
Advertisement
Quick Links
2 Burner Tabletop BBQ
470W x 364D (mm) solid steel cooking surface
Powerful 20 MJ/hr stainless steel burners
Powder coated steel frame & fascia
Adjustable feet for all-surface stability
Hose and regulator included (Universal LPG only)
2
Burner
Solid
Automatic
Hotplate
Important: Please retain these instructions for future use
THIS BARBEQUE IS INTENDED FOR OUTDOOR USE ONLY
STEEL
S/Steel
Burner
Cooking
Ignition
Material
Plate
Model BG2039B2
Dimensions: 618 (W) x 430 (D) x 213 (H) mm
Advertisement
Table of Contents
Related Manuals for Jumbuck BG2039B2
Summary of Contents for Jumbuck BG2039B2
- Page 1 Hose and regulator included (Universal LPG only) STEEL S/Steel Burner Solid Automatic Burner Cooking Hotplate Ignition Material Plate Model BG2039B2 Dimensions: 618 (W) x 430 (D) x 213 (H) mm Important: Please retain these instructions for future use THIS BARBEQUE IS INTENDED FOR OUTDOOR USE ONLY...
-
Page 2: Cylinder Connection
IMPORTANT HEALTH & SAFETY INFORMATION Please keep these instructions WARNING! FOR OUTDOOR USE ONLY! DO NOT USE INDOORS • • Unsupervised children, elderly and Please read these instructions carefully infirm should not be allowed close to the prior to assembly and use. barbecue during pre-heat, cooking, burn •... -
Page 3: If You Smell Gas
IMPORTANT HEALTH & SAFETY INFORMATION Please keep these instructions IF YOU SMELL GAS PRECAUTIONS DO NOT ATTEMPT TO OPERATE THE BEFORE FIRST TIME OPERATION AND BARBECUE UNTIL THE CAUSE OF THE AFTER EACH GAS CYLINDER EXCHANGE/ GAS SMELL HAS BEEN IDENTIFIED AND REFILL, ALL CONNECTIONS SHOULD BE ELIMINATED CHECKED FOR GAS LEAKS... -
Page 4: Parts List
PARTS LIST Model BG2039B2 Part Description Firebox Barbeque Feet 4pcs Cooking Plate M5 Screws 2pcs Grease Cup Holder Grease Cup Hose & Regulator... - Page 5 ASSEMBLY INSTRUCTIONS Model BG2039B2 STEP 1 Remove the cooking plate (Part 3) STEP 2 Turn the Firebox (Part 1) over and fasten the four Barbeque Feet (Part 2) as shown in the diagram below...
- Page 6 ASSEMBLY INSTRUCTIONS STEP 3 a) Turn the Firebox (Part 1) over standing on the four Barbeque Feet (Part 2) as shown in the diagram below b) Place the Cooking Plate onto the Firebox aligning and inserting the four cooking plate supports in to the four firebox holes as shown in the diagram below STEP 4 Remove the two pre-assembled M5 Screws (Part 4) found on the...
- Page 7 ASSEMBLY INSTRUCTIONS STEP 5 Attach the Grease Cup Holder (Part 5) to the left side of firebox panel with the two M5 Screws (Part 4) as shown in the diagram below STEP 6 Place the Grease Cup (Part 6) onto the Grease Cup Holder (Part 5) as shown in the diagram below...
- Page 8 ASSEMBLY INSTRUCTIONS STEP 7 a) Attach the Hose & Regulator (Part 7) to the gas cylinder b) It is fastened in an anti-clockwise direction Do not over-tighten...
-
Page 9: Setting Up The Barbeque
SETTING UP THE BARBEQUE Any enclosure in which the appliance is used THIS APPLIANCE SHALL ONLY BE USED shall comply with one of the following: IN AN ABOVE GROUND OPEN AIR • SITUATION WITH NATURAL An enclosure with walls on all sides, but at least VENTILATION one permanent opening at ground level and no overhead cover (EXAMPLE 1) - Page 10 SETTING UP THE BARBEQUE • PRECAUTIONS Should there be any concern in making the correct regulator connection please contact the after sales service number list in this manual. DO NOT OBSTRUCT ANY AIRFLOW PATH OR VENTILATION PATHS OF THE BARBECUE POL FITTING 5/8”...
- Page 11 OPERATING YOUR BARBEQUE WARNINGS • Before using the barbecue please ensure you have read and understood all information in this HIGH entire instructions manual. PRIOR TO COOKING • It is advisable to wash the cooking surface with WARNING: IF AFTER THE SECOND ATTEMPT soapy water, rinse with fresh water then apply THE BARBECUE STILL FAILS TO IGNITE THERE a light coating of cooking oil before starting to...
-
Page 12: Care And Maintenance
CARE & MAINTENANCE • Ensure that when the burners are replaced they BEFORE ANY CARE AND MAINTENANCE are positioned correctly over the control valves, IS ATTEMPTED PLEASE ENSURE THAT THE care must be taken not to damage the valves. BARBECUE CONTROLS ARE IN THE ‘OFF’ POSITION AND THAT ALL SURFACES HAVE BEEN CARE OF THE BARBEQUE BODY GIVEN SUFFICIENT TIME TO COOL DOWN. -
Page 13: Troubleshooting Guide
TROUBLESHOOTING GUIDE Problem Potential Cause Corrective Action Gas cylinder is empty Check and refill/exchange gas cylinder Cannot light burners Regulator is faulty Check and replace if required Blocked burner Check and clean all burner holes Blocked gas jets Check and clean gas jets Blocked gas hose Check and clean gas hose Gas cylinder may be too small... -
Page 14: Technical Specifications
TECHNICAL SPECIFICATIONS BG2039B2 Model Gas Type UNIVERSAL LPG Burner Injector Size 0.88mm Burner Gas Consumption 10MJ/hr Burner Gas Pressure 2.75 Kpa Total Gas Consumption 20 MJ/hr Approval Number GMK 10738 DISCLAIMERS IF AT ANY TIME YOU ARE IN ANY DOUBT ABOUT •...