Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Jumbuck HS-FP002
Summary of Contents for Jumbuck HS-FP002
-
Page 2: Outdoor Use Only
JUMBUCK RONDO MEDIUM 3180887 CHARCOAL SPIT ROASTER (HS-FP002) SAFETY INSTRUCTIONS For outdoor use only. Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. OUTDOOR Read the installation instructions thoroughly before installing this equipment. - Page 3 SPIT ROASTER OPERATING GUIDELINES Cleaning Lighting the spit roaster solid fuel is to be used for this product (fire once finish cooking, remove left over solid fuel wood, charcoal etc.) from the spit roaster always ensure spit roaster is clean and free ...
- Page 4 EXPLODED VIEW AND PARTS CODE Part Number Parts Description Parts Code Leg Back Asm FP00201 Front Leg FP00202 Wheel FP00203 Body Asm FP00204 Carbon Box FP00205 Cooking Grid FP00206 Right Motor Support FP00207 Left Motor Support FP00208 Motor FP00209 Rotisserie Rod FP00210 Rotisserie Brace FP00211...
-
Page 5: Carton Contents
CARTON CONTENTS 1. Leg Back Asm ..2pcs 2.Front Leg..…..2pcs 3. Wheel...…..…. 4pcs 4. Body Asm..………1pc 5. Carbon Box……..1pc 6. Cooking Grid ..….…...2pcs 7.Right Motor Support…1pc 8.Left Motor Support…….1pc 9．Motor ……….1pc 10. Rotisserie Rod……….1pc 11. Rotisserie Brace…….1pc 12. Large Rotisserie Prong…….1pc 13.Rotisserie Support….1pc 14.Rotisserie Handle….2pcs 15. -
Page 6: Hardware Pack Contents
HARDWARE PACK CONTENTS Shrapnel ￠6 Bolt M6x40mm 10pcs 10pcs Washer ￠6 Nut M6 10pcs 10pcs Bolt M8X50 Nut M8 4pcs 4pcs Bolt M6X10 Spanner... -
Page 7: Assembly Instructions
ASSEMBLY INSTRUCTIONS Remove all contents from packaging, and make sure all the parts are present before attempting to assemble! Tighten all bolt connections by hand first. When the spit roaster is fully assembled, retighten the screws, nuts and bolts by using a wrench and screwdriver. Step1: Assemble Front Leg (Part 2) to the Back Leg (Part 1), Use Bolt A, Shrapnel B Washer C Nut D to tighten as shown. - Page 8 Step 3: Assemble the two Leg Asm to the Body (Part 4), Use Bolt A, Shrapnel B Washer C Nut D to tighten as shown. Step 4: Put the Carbon Box (part 5) into the Body as shown.
- Page 9 Step 5: Insert the Cooking Grid (part 6) into the Body as shown. Step 6: Assemble Right Motor Support (part 7) and Left Motor Support (Part 8) to the Leg, Use Bolt E Nut F to tighten as shown.
- Page 10 Step 7: Insert Motor (Part 9) in the Right Motor Support (Part 7), as shown Step 8: Insert Rotisserie Support (Part 13), Large Rotisserie Prong (Part 12), Rotisserie Brace (Part 11) , Small Rotisserie Prong (Part 15) onto Rotisserie Rod (Part 10) as shown. Then assemble Rotisserie Handle (Part 14) onto Rotisserie Support (Part 13) and Large Rotisserie Prong (Part 12), as shown.
- Page 11 Step 9: Insert the Rotisserie Rod (after step 8) to the Motor, and use Bolt G to tighten for the Rotisserie Brace (Part 11) Your spit roaster is now ready for use. Please take care when lighting your spit roaster. Keep children away from the spit roaster at all time.
-
Page 12: Warranty
Bunnings NZ Limited the operating manual. PO Box 14436, Any repair does not extend the warranty period. Panmure, Auckland, 1471 Any parts other than original Jumbuck parts will NEW ZEALAND void this warranty. (09) 978 2200 marketing@bunnings.co.nz Proof of purchase must be presented. - Page 13 WARRANTY For New Zealand Customer For Australian Customers Any claim under this warranty must be made Any claim under this warranty must be made within 12 months of the date of purchase of the within 12 months of the date of purchase of the product.
- Page 14 Liability will only be accepted for loss or damage technical issues with your JUMBUCK SPIT ROASTER, in the first instance review the instructions manual during transit if at the time the product was being...
Need help?
Do you have a question about the HS-FP002 and is the answer not in the manual?
Questions and answers