SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS IMPORTANT: READ THE ASSEMBLY INSTRUCTIONS IN THIS BOOKLET BEFORE REMOVING THE CONTENTS OF THIS CARTON IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS This appliance must This appliance must only be used in an above only be used in an above •...
WARNING WARNING WARNING WARNING OTHER CONSIDERATION OTHER CONSIDERATIONS S S S OTHER CONSIDERATION OTHER CONSIDERATION A strong gas smell or the hissing sound of gas Strong winds and low temperatures can • indicates a serious problem with your gas BBQ or affect the heating and performance of your the gas cylinder.
Page 5
PLACEMENT OF BBQ A A A A NY ENCLOSURE IN NY ENCLOSURE IN NY ENCLOSURE IN NY ENCLOSURE IN WHICH THE APPLIANCE IS USED WHICH THE APPLIANCE IS USED WHICH THE APPLIANCE IS USED WHICH THE APPLIANCE IS USED PLACEMENT PLACEMENT OF BBQ OF BBQ PLACEMENT...
GAS CYLINDER CYLINDER SAFETY INFORMATION SAFETY INFORMATION CYLINDER CYLINDER SAFETY INFORMATION SAFETY INFORMATION GAS TYPE GAS TYPE HOSE AND REGULATOR REPLACEMENT HOSE AND REGULATOR REPLACEMENT GAS TYPE GAS TYPE HOSE AND REGULATOR REPLACEMENT HOSE AND REGULATOR REPLACEMENT Note the labeling of appropriate gases listed on In the case of a problem arising with the hose and your BBQ and ascertain that the gas you have is regulator please contact your BBQ supplier for a list...
LEAK TESTING LEAK TESTING LEAK TESTING LEAK TESTING Please check for gas leakage the first time you are connecting the BBQ to the gas cylinder, and also each time you are replacing the gas cylinder or disconnecting/reconnecting any fittings. Inspect 1.
CONTROLLING THE FLAMES CONTROLLING THE FLAMES CONTROLLING THE FLAMES CONTROLLING THE FLAMES LIGHTING PROCEDURE LIGHTING PROCEDURE LIGHTING PROCEDURE LIGHTING PROCEDURE The knobs have three basic positions. You can achieve • Lighting the BBQ is easy, but must be done with any flame height between low and high by rotating the due care.
Page 9
COOKING SURFACE MAINTENANCE COOKING SURFACE MAINTENANCE FI FI FI FIRST TIME USE RST TIME USE RST TIME USE RST TIME USE - - - - CURING T CURING T CURING T CURING THE PLATE HE PLATE HE PLATE HE PLATE COOKING SURFACE MAINTENANCE COOKING SURFACE MAINTENANCE Burning at maximum heat for approximately 5-10...
Page 10
BBQ MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE IMPORTANT INFORMATION IMPORTANT INFORMATION IMPORTANT INFORMATION IMPORTANT INFORMATION Apart from cleaning, your BBQ is a fairly low • This product is for outdoor use only. maintenance appliance. Below are a couple of • Do not use indoors. things worth looking at though.
BURNER MAINTENANCE BURNER MAINTENANCE BURNER MAINTENANCE BURNER MAINTENANCE You should check the burners periodically for any sort Use a bottle brush with a flexible handle. Run the brush of blockage. To do this, remove and inspect them. If through the burner tube and inside the burner several any of the holes are clogged, gently tap the burner times, removing any debris.
Page 13
PARTS CODE Parts Number Parts Number Parts Number Parts Number Parts Name Parts Name Parts Name Parts Name Parts Code Parts Code Parts Code Parts Code Hood UM006AS01 Hood Handle UM006AS02 Hood Back Plate UM006AS03 Temperature Gauge UM006AS04 Warming Grid UM006AS05 Grill Plate UM006AS06...
HARDWARE PACK CONTENTS Reference# Reference# Description Description Part# Part# Parts Parts Quantity Quantity Reference# Reference# Description Description Part# Part# Parts Parts Quantity Quantity A A A A Bolt M6x15mm B B B B Bolt M6x75mm Spring Washer C C C C Ø6.0mm Flat Washer D D D D...
ASSEMBLY INSTRUCTIONS ASSEMBLY TIPS ASSEMBLY TIPS ASSEMBLY TIPS ASSEMBLY TIPS Remove all contents from packaging, and make sure all the parts are present before attempting to Remove all contents from packaging, and make sure all the parts are present before attempting to Remove all contents from packaging, and make sure all the parts are present before attempting to Remove all contents from packaging, and make sure all the parts are present before attempting to •...
Page 20
STEP 2 Install Drip Tray Support-Left(Part 20) and Drip Tray Support-Right(Part 23) onto the BBQ Body(Part 1) as per illustration below. Use Bolt(Part A) to secure. STEP 3 Insert the Knob(Part 22) onto the gas control valves on the BBQ Body(Part 1) as per illustration below.
Page 21
STEP 4 Insert the Leg Insert(Part 24) onto the bottom of the two Left Leg(Part 2). Assemble Left Leg(Part 2) to the Side Panel(Part 4) as per illustration below. Use Bolt(Part A) to secure. STEP 5 Attach Wheel(Part 6) to the Wheel Axle(Part 5)and use Nut(Part F) and Flat Washer(Part E) to secure as per illustration below.
Page 22
STEP 6 Attach the two assembled Side Panel(Part 4) to the BBQ Body(Part 1) as per illustration below. Use Bolt(Part B), Spring Washer(Part C) and Flat Washer(Part D) to secure. STEP 7 Assemble the Bottom Shelf(Part 14) onto the legs as per illustration below, and use bolts Bolt(Part B) Spring Washer(Part C) and Flat Washer(Part D) to secure.
Page 23
STEP 8 Assemble the Hood Back Plate(Part 19) onto the Hood(Part 16) by using Bolt(Part A) as per illustration below. STEP 9 Assemble the Hood Handle(Part 17) and the Hood Handle Support(Part 21) to the Hood(Part16) as per illustration below. Use Bolt(Part A) to secure.
Page 24
STEP 10 Assemble the Temperature Gauge(Part 18) to the Hood(Part16) as per illustration below. STEP 11 Attach the Hood(Part 16) onto the BBQ Body(Part 1) and secure with Bolt(Part G) as per illustration below.
Page 25
STEP 12 Place the Flame Tamer(Part 9) into the BBQ Body(Part 1) as per illustration below. STEP 13 Place Grill Plate(Part 10) and Hotplate(Part 11) into BBQ Body(Part 1) as per illustration below.
Page 26
STEP 14 Place Warming Grid(Part 15) onto BBQ Body(Part 1) as per illustration below. STEP 15 Assemble the Cylinder Hook(Part 7) to the BBQ Body(Part 1) as per illustration below. Use Bolt(Part A) to secure.
Page 27
STEP 16 Assemble the Cloth with Logo(Part 12) to the legs by using Bolt(Part A) as per illustration below. Use Bolt(Part A) to secure. Step 17 Insert Drip Tray(Part 13) onto the Drip Tray Support Left & Right(Part 20 & 23) under the BBQ Body(Part 1) as per illustration below.
Page 28
F F F F ully ully ully- - - - Assembled ully Assembled Assembled Assembled Your BBQ is now ready for use. Your BBQ is now ready for use. Your BBQ is now ready for use. Your BBQ is now ready for use. Please take care when lighting your BBQ.
The warranty for New Zealand is given by : the operating manual. Bunnings NZ Limited • Any repair does not extend the warranty period. PO Box 14436, • Any parts other than original Jumbuck parts will Panmure, Auckland, 1471 void this warranty. NEW ZEALAND (09) 978 2200...
Page 31
WARRANTY WARRANTY WARRANTY WARRANTY For New Zealand Customer For New Zealand Customer For New Zealand Customer For New Zealand Customer For Australia For Australian n n n Customers For Australia For Australia Customers Customers Customers Any claim under this warranty must be made To make a claim under the warranty, please within 12 months of the date of purchase of the contact Genesis Australia at...
Page 32
For Australia customers For Australia customers not cover costs for transit, nor in home service technical issues with your JUMBUCK BBQ, in the • Liability will only be accepted for loss or damage first instance review the instructions manual or...
Need help?
Do you have a question about the HS-UM006AS and is the answer not in the manual?
Questions and answers