System Or Device; Network Configuration; Physical Layer - ABB Relion RER615 Manual

Hide thumbs Also See for Relion RER615:

Table of Contents

Section 3

IEC 60870-5-101/104 protocol implementation

3.3

3.4

3.5

Function or ASDU is not used

Function or ASDU is used as standardized (default)

Function or ASDU is used in reverse mode

Function or ASDU is used in standard and reverse mode

The possible selection (blank, X, R, or B) is specified for each specific clause or

parameter.

The full specification of a system may require individual selection

of certain parameters for certain parts of the system, such as the

individual selection of scaling factors for individually addressable

measured values.

System or device

(System-specific parameter, indicate the station's function by marking one of the

following with "X".)

System definition

Controlling station definition (master)

Controlled station definition (slave)

(Network-specific parameter, all configurations that are used are to be marked with

"X".)

Point-to-point

Multiple point-to-point

(Network-specific parameter, all configurations and data rates that are used are to

be marked with "X".)

Multipoint-party line

Multipoint-star

Recloser Protection and Control RER615

1MRS757824 C

Point List Manual

Table of Contents