ABB Relion RER615 Manual page 64

Section 3
IEC 60870-5-101/104 protocol implementation
58
<110>:= Parameter of measured value, normalized value
<111>:= Parameter of measured value, scaled value
<112>:= Parameter of measured value, short floating point value
<113>:= Parameter activation
File transfer
(Station-specific parameter, mark each Type ID with an "X" if it is only used in the
standard direction, "R" if only used in the reverse direction, and "B" if used in both
directions.)
<120>:= File ready
<121>:= Section ready
<122>:= Call directory, select file, call file, call section
<123>:= Last section, last segment
<124>:= Ack file, ack section
<125>:= Segment
<126>:= Directory {blank or X, only available in monitor (standard) direction}
Type identifier and cause of transmission assignments
(Station-specific parameters)
Shaded boxes: option not required.
Blank: functions or ASDU not used.
Mark the Type Identification/cause of transmission combinations.
"X" if only used in the standard direction
"R" if only used in the reverse direction
"B" if used in both directions
1MRS757824 C
P_ME_NA_1
P_ME_NB_1
P_ME_NC_1
P_AC_NA_1
F_FR_NA_1
F_SR_NA_1
F_SC_NA_1
F_LS_NA_1
F_AF_NA_1
F_SG_NA_1
F_DR_TA_1
Recloser Protection and Control RER615
Point List Manual