ABB Relion RER615 Manual page 69

Hide thumbs Also See for Relion RER615:

Table of Contents

1MRS757824 C

Recloser Protection and Control RER615

Point List Manual

IEC 60870-5-101/104 protocol implementation

group 5

group 11

group 6

group 12

Information object addresses assigned to each group must be shown in a separate table.

Clock synchronization

(Station-specific parameter, mark with an "X" if the function is only used in the

standard direction, "R" if only used in the reverse direction, and "B" if used in both

directions.)

Clock synchronization

Day of week used

RES1, GEN (time tag substituted/ not substituted) used

SU-bit (summertime) used

Command transmission

(Object-specific parameter, mark with an "X" if the function is only used in the

standard direction, "R" if only used in the reverse direction, and "B" if used in both

directions.)

Direct command transmission

Direct set point command transmission

Select and execute command

Select and execute set point command

C_SE ACTTERM used

No additional definition

Short-pulse duration (duration determined by a system parameter in the outstation)

Long-pulse duration (duration determined by a system parameter in the outstation)

Persistent output

Transmission of integrated totals

(Station- or object-specific parameter, mark with an "X" if the function is only

used in the standard direction, "R" if only used in the reverse direction, and "B" if

used in both directions.)

Section 3

Table of Contents