Quectel SC200L Series Hardware Design page 50

GPIO_55 110
GPIO_122 112
GPIO_30 113
GPIO_29 115
GPIO_93 116
GPIO_90 117
GPIO_92 118
GPIO_91 119
GPIO_32 123
GPIO_08 124
NOTE
1. For details of GPIO configuration, see document [3].
2. For external inputs with hardware mechanical jitter, such as keypad, OTG ID, etc., select GPIOs that
can be multiplexed into EXTINT functions.
3. To provide enable signal for ICs like flashlight, switching charger, DC-DC, etc., select GPIOs whose
default state is PD.
4. When a non-EXTINT GPIO is used as an interrupt input, wakeup can only be triggered by level (that
is, cannot be triggered by edge).
SC200L_Series(Dual-band Wi-Fi)_Hardware_Design
IN/PD DIO
IN/PD DIO
IN/PD DIO
IN/PD DIO
IN/PD DIO
IN/PU DIO
IN/PD DIO
IN/PD DIO
IN/PD DIO
IN/PD DIO
General-purpose input/output
General-purpose input/output
General-purpose input/output
General-purpose input/output
General-purpose input/output
General-purpose input/output
General-purpose input/output
General-purpose input/output
General-purpose input/output
General-purpose input/output
Smart Module Series
Can be multiplexed
into EXTINT12.
Can be multiplexed
into EXTINT8.
Can be multiplexed
into EXTINT5.
Can be multiplexed
into EXTINT7.
Can be multiplexed
into EXTINT6.
49 / 111