Northern Telecom DMS-100 Series Manual page 149

Table 9-3xxx
Recommended I/O cable replacement procedures (continued)
Shelf I/O connector
39 Left T1-2
(cont'd)
T1-3
T1-4
Procedure A
Take the associated nodes out-of-service by following the appropriate
procedures contained in the DMS VoiceMail Card Replacement Procedures
(NTP 297-7001-502). Listed below are the card replacement procedures to
refer to in the 297-7001-502:
If the problem involves an:
MSP
SPN
SMDI Link
Procedure B
Take the SPM out-of-service before replacing this cable.
Procedure C
Take the specific T1 link out-of-service by following the appropriate
procedures contained in the DMS VoiceMail Card Replacement Procedures
(NTP 297-7001-502).
DMS VoiceMail Trouble-locating and alarm-clearing procedures SPM 02
Cabinet and I/O connections
Recommended procedure
Procedure C
Procedure C
Procedure C
Use the following procedure:
NTGX05AA for a MSP Node
NTGX05AA for a SPN Node
NTGX05AA for a TIFN Node
9-15