Cannot Disable T1 Channel; Cannot Disable Smdi Link - Northern Telecom DMS-100 Series Manual

6-12 Telephony interface node

Cannot disable T1 channel

If you cannot disable a T1 channel, use procedure 6-11.
Procedure 6-11xxx

Cannot disable T1 channel

Step
1

Cannot disable SMDI link

If you cannot disable an SMDI link, use procedure 6-12.
Procedure 6-12xxx

Cannot disable SMDI link

Step
1
297-7001-503 Standard 02.02 March 1994
Action and response
Disable the T1 span
From the T1 Link Status screen, disable the T1 span that is
associated with the T1 channel that cannot be disabled.
If the T1 span is successfully disabled, then the T1 channel has been
disabled and you have successfully completed this procedure.
If the T1 span does not disable, refer to the procedure called Cannot
disable T1 span in this chapter.
Action and response
Disable the node
From the Node Status screen, disable the TIFN that is associated
with the SMDI link that cannot be disabled.
If the TIFN is successfully disabled, then the SMDI link has been
disabled and you have successfully completed this procedure.
If the TIFN does not disable, refer to the procedure called Cannot
disable node in this chapter.