Node Rebooting - Northern Telecom DMS-100 Series Manual

Node rebooting

If a TIFN continuously attempts to reboot, use procedure 6-19.
Procedure 6-19xxx

Node rebooting

Step Action and response
1 Node reboots continuously
If a TIFN is continuously attempting to reboot (that is, constantly
changing from the faulty state to the rebooting state and back again),
then go to the next step.
If a TIFN makes one attempt to reboot and it fails, go to the
procedure called Node recovery in this chapter.
2 Replace the 68K card
Go to the procedure for replacing the 68K card (NTGX05AA) in the
DMS VoiceMail Card Replacement Procedures (NTP
297-7001-502) . Return to this procedure once the 68K card has
been replaced.
If the TIFN has successfully loaded, you have completed this
procedure.
If the TIFN does not load successfully, go to the next step.
3 Replace the T1 card
Go to the procedure for replacing the T1 card (NTGX08AA) in the
DMS VoiceMail Card Replacement Procedures (NTP
297-7001-502) .
If the TIFN has successfully loaded, you have completed this
procedure.
If the TIFN does not load successfully, go to the next step.
4 Replace the 68K transition module
Go to the procedure for replacing the 68K transition module
(NTGX06AA) in the DMS VoiceMail Card Replacement Procedures
(NTP 297-7001-502) .
If the TIFN has successfully loaded, you have completed this
procedure.
If the TIFN does not load successfully, go to the procedure called
Node recovery in this chapter.
DMS VoiceMail Trouble-locating and alarm-clearing procedures SPM 02
Telephony interface node 6-19