Table of Contents
Advertisement
end of the power cord into the power socket at the rear of the unit, and the other
end into a power outlet.
CAUTION
!
Do not connect both AC and DC power cords to the VPAP Malibu at the
same time.
WARNING
!
Make sure the power cord and plug are in good condition and the
equipment is not damaged.
3
Connect one end of the air tubing firmly onto the air outlet of the unit.
WARNING
!
Only ResMed air tubing should be used with your flow generator. A
different type of air tubing may alter the pressure you actually receive
reducing the effectiveness of your treatment.
4
Assemble your mask system according to the mask user instructions.
14
AC power switch
Locking clip
AC power cord
Advertisement
Table of Contents
