Troubleshooting
Problem
The attachment loosened too little
material.
The appearance of the field is poor.
Possible Cause
1. The working depth is set too shallow.
2. The infill material is too compacted.
1. The working depth is set too deep.
2. The drag brush does not drag over the
ground.
3. The drag brush is damaged.
13
Corrective Action
1. Increase the working depth.
2. Drive multiple passes over the turf,
each with a deeper setting.
1. Decrease the working depth.
2. Ensure that the chains are fully
extended or change the length of the
upper link.
3. Replace or repair the drag brush.