Table of Contents
Advertisement
Figure 7
1. Lower link arm (2)
6.
Secure the lower link arms to the hitch pins
using the hairpin cotters.
Note:
For maximum ground clearance, install
the hitch pins in the lower mounting holes of the
hitch plate for the attachment.
g345394
2. Hitch pin and hairpin cotter
(2)
Connecting the Upper Link
1.
Connect the upper link to the lower hole in the
bracket frame secure it with the link pin and the
hairpin cotter.
1. Upper link
2. Jam nut
2.
Grease the threaded steel upper link tubes.
3.
Rotate the upper link to tighten the link. Adjust it
until the attachment is flat on the ground.
4.
Tighten the jam nut to secure the upper link into
position.
5.
Start the traction unit and lift the attachment off
the ground.
6.
Raise the 4 storage legs.
1. Adjustable leg
8
Figure 8
3. Hairpin cotter
4. Link pin
Figure 9
2. Pin
g345396
g346766
Advertisement
Table of Contents
