Printing The Test Results And Channel Data; Figure 4-10. Sample Printing Results And Printing Components Screens; Figure 4-11. Samples Of Printed Test Results - Bacharach PUR-CHEK PRO Manual

Operation and Maintenance Instruction Manual

Air is measured independently from refrigerant. You can have 100% pure
NOTE:
refrigerant with a percentage of air in a system or tank. The presence of air will
display on the initial results screen and on every printed test.

4.11. Printing the Test Results and Channel Data

The test results can be printed by selecting the PRINT button. Pressing PRINT will print the test results
for all analyzed refrigerants. The screen in Figure 4-10 A will display during printing. If printing identified
or unknown refrigerants, pressing PRINT will print the channel data from the test. Figure 4-10 B will
display during channel data printing.

Figure 4-10. Sample Printing Results and Printing Components Screens

After the print is complete, carefully tear off the printout and the unit will return to the previous screen.
Additional printouts may be made following the same procedure. To exit the test, press the EXIT button.
Figure 4-11A, Figure 4-11B, and Figure 4-11C show sample printouts for various test results.
NOTE: Care must be taken when tearing off the printed results to leave a clean edge. Tear
the paper from RIGHT to LEFT to avoid paper jams.
P/N 2100-9001 Rev 3
(A)
(A)

Figure 4-11. Samples of Printed Test Results

(B)
(B) (C)
13