Gas Connection; Fasten The Label; General - Electrolux TE1220E Installation Manual

26

8 Gas connection

8.1 Fasten the label

Before installing the machine fasten the label the "user instructions" on the inside of the door in a suitable place and
at the front panel.
The label must have the correct country code, choose the correct label from the gas kit.

8.2 General

May only be carried out by qualified personnel.
Mount a shut-off valve upstream from the machine.
The factory injector pressure setting corresponds to the fuel value given on the data label.
Check that the injector pressure and fuel value correspond with the values in the gas tables on the following pages. If
not, contact the supplier.
Note!
After connection all joints must be checked. There must not be any leaks.
Installation manual
Read the technical instructions before installing the appliance. Read the user instructions before lighting the appliance.
GB, IE This appliance may only be installed in a room if the room meets the appropriate ventilation requirements speci ed
in the national installation regulations. This appliance shall be installed in accordance with the rules in force, and
used only in a su ciently ventilated space. Consult instructions before installation and use of this appliance.
User Instructions
Part Number: 0180500***-EN
fig.W01623