Install The Electronic Coin Meter (Coin Operated Models) - Electrolux TE1220E Installation Manual

24

7.4 Install the Electronic Coin Meter (Coin Operated Models)

1. Unlock control panel with the provided key.
2. Loosen four screws in the control panel.
3. Extract the four terminals of the display PCB, and remove the main control panel, then demount the control panel
seat.
4. Install the coin meter faceplate into the control panel seat with two hexagonal disc nuts, then assemble the coin
meter into the faceplate with two hexagon self-locking nuts.
5. Connect the eight-pin terminal to the harness, then fix the harness onto the crossbeam with a plastic clip
A two hexagonal disc nuts
B eight-pin terminal
C two hexagon self-locking nuts
Installation manual
A
C
B
fig.W01621