Gas Connection; General - Electrolux T5675 Installation Manual

8 Gas connection

8.1 General

This appliance shall be installed only by authorised personnel and in accordance with the manufacturer's
installation instructions, local gas fitting regulations, municipal building codes, electrical wiring regulations,
AS5601/AG601 — Gas Installations and any other statutory regulations.
Mount a shut-off valve upstream from the machine.
The gas connection to the machine should be dimensioned to an output depending upon the
kW-rating of the machine.
The factory nozzle pressure setting must correspond to the fuel value given on the data label.
Check that the nozzle pressure and fuel value correspond with the values in the gas tables on the
following pages. If not, contact the supplier.
Bleed the pipe system before connecting the machine. Refer to AS5601 for correct gas pipe size.
After connection, test all joints for leaks.
Gas connection
Caution
29