Electrolux TE1220E Installation Manual page 25

6. Mount the control panel seat carefully, don't damage the coinmeter.
7. Reinstall the control panel seat by using the four screws.
D the crossbeam
E plastic clip
F total four screws
G the four terminals of the display PCB (Electric heated)
H main control panel
8. Connect the four terminals of the display PCB, the above figure shows the connection of four terminals of electric
heating dryer, but for the gas heated dryer, the four terminals are directly connected to the display board.
9. Locking main control panel with the provided key.
Installation manual
25
fig.W01622