Table of Contents
Advertisement
REFRIGERATOR COMPONENTS
1. Control panel: Digital thermometer, fluorescent light switch, door check lamp, power failure and
temperature warning device.
2. Door switch: Stops the air circulation fan when the door is opened to prevent the loss of cold air.
Also activates the door check lamp.
3. Air circulation fan: Located inside, at the top of the unit.
4. Glass window: This 3-layer heat-rays absorbing glass window prevents heat-rays from entering the
unit.
5. Inner doors: Small transparent doors are provided for making the items on the wire shelf accessible
by merely opening one of them.
6. Magnet door seal: Ensures a tight door seal and prevents loss of air.
7. Wire shelves: The shelves can be adjusted vertically. For normal use, adjust the shelves to match
the inner doors.
8. Door: With self-closing mechanism. Magnet door seal ensures a tight seal being formed when the
door is closed.
9. Temperature recorder
10. Kick plate: When the unit is placed close to the wall, the kick plate functions as an air outlet.
11. Evaporating tray: Located behind the kick plate. Water condensed on the cooler collects on the
evaporating tray and evaporates automatically inside the refrigerator.
12. Air intake duct: For cooling the compressor etc.
13. Leveling feet: There are 4 leveling feet, one on each corner. Used to adjust the leveling and height
of the unit.
14. Switch cover: Power switch and fuse are located here.
15. Air inlet: Located below the bottom shelf. Do not remove the stainless steel panel from the bottom
shelf.
16. Access port: Through this port the measuring cable can be inserted.
17. Magnetic catch: Seals the door with the cabinet.
18. Temperature sensor for temperature recorder
19. Air outlet: Air used for cooling is released through the outlet.
20. Shade: Protects the fluorescent light.
21. Lock
22. Cabinet
9
Advertisement
Table of Contents
