Wearing The Helmet; Putting On The Helmet; Removing The Helmet - Sena MOMENTUM EVO User Manual

1 ABOUT THE MOMENTUM EVO BLUETOOTH HELMET WITH MESH INTERCOM™

1.6 Wearing the Helmet

1.6.1 Putting on the Helmet

1. Unfasten the chinstrap.
2. Gently pull the chinstrap outward and slide the helmet onto your
head.
3. Route the chinstrap under your chin, then thread it through both
D-Rings.
4. To fasten securely, thread chinstrap back through the D-Ring closest
to your neck, and pull.
Chinstrap
Thread chinstrap through the D-Rings
Note: A "chinstrap" is the nylon webbing that goes through the
D-Rings.

1.6.2 Removing the Helmet

1. Loosen the chinstrap by pulling the red tab attached to the D-Rings.
2. Pull the chinstrap out from within the D-rings.
3. Gently pull the padded chinstrap outward and slide the helmet off
your head.
Advice: Fastening the chinstrap after removing the helmet will help
avoid scratching surfaces it's placed upon.
MOMENTUM EVO Motorcycle Bluetooth Helmet With Mesh Intercom™ | 10
®