Keypad Tone Setting (Some Models); C & °F Scale Selection (Some Models); Turbo Function (Some Models); Lift Panel Function (Only For Some Cassette) - Rotenso CONTROL Series User Manual

SAVA wired controller
EN
WIRED CONTROLLER SUPPORT

5.7. Keypad tone setting (some models)

5.8. °C & °F scale selection (some models)

5.9. Turbo function (some models)

• Press TURBO to activate/deactivate the Turbo/Auxiliary Heat function. The turbo function sets the unit to
reach the user's present temperature in the shortest amount of time possible.
• When the user presses TURBO in the COOL mode, the unit sets to the highest fan speed setting to jump -
start the cooling process.

5.10. Lift panel function (only for some cassette)

2. Press the button + and - to control the lift and drop of the panel.
Pressing the + button can stop the panel,while it is dropping.
Pressing the - button can stop the panel,while it is lifting.
24
User manual
Press SWING and TIMER simultaneously for 3 seconds to disable the
keypad tone.
Press the buttons again for 3 seconds to enable the keypad tone.
Press BACK and COPY simultaneously for 3 seconds to alternate the
temperature display between the °F & °C scale.
1. When the unit is off. Press the Mode button long to activate the lift
panel function. The
The F2 mark appears when the
panel is adjusted.
mark will flash.