Fan Speed Setting; Room Temperature Sensor Selection (Some Models); Child Lock Function - Rotenso CONTROL Series User Manual

5.4. Fan speed setting

Press FAN SPEED to set the fan speed
NOTE: This function is unavailable in the AUTO or DRY modes.

5.5. Room temperature sensor selection (some models)

Press FOLLOW ME to select whether the room temperature is detected at the indoor unit or at the wired
controller.
NOTE: When the FOLLOW ME function indication
remote controller.

5.6. Child lock function

Press LOCK for 3 seconds to activate the CHILD LOCK feature and lock all
buttons on the wired controller. Press again for 3 seconds to deactivate.
NOTE: When the child lock function is activated, the
WIRED CONTROLLER SUPPORT
appears, the room temperature is detected at the wire
SAVA wired controller
lock image appears.
User manual
EN
23