Operation; To Start/Stop Operation; Operation Mode Setting; Operation Temperature Setting - Rotenso CONTROL Series User Manual

SAVA wired controller
EN
WIRED CONTROLLER SUPPORT
3. Date setting is complete and the time setting is ready after pressing TIMER or if nothing is pressed in 10
seconds.
4. Press + or − to set the current time. Press repeatedly to adjust the current time in 1 minute increments.
Press and hold to adjust the current time.
5. The setting is complete after pressing TIMER or if no button is pressed for 10 seconds.

5. OPERATION

5.1. To start/stop operation

5.2. Operation mode setting

Press MODE to set the operation mode.

5.3. Operation temperature setting

Lower Raise
22
User manual
ex.Monday AM 11:20
Press the Power button.
Press + or − to set the room temperature.
Indoor Setting Temperature Range:
62~86°F (17~30°C) / 62~88°F (17~31°C) (depending on models)).