Chapter 44: Replacing The Touch Pad; Procedure; Post-Requisites - Dell Inspiron 14 3000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1. Slide and replace the touch pad into its slot on the palm-rest assembly.
2. Align the screw holes on the touch-pad board with the screw holes on the palm-rest assembly.
3. Replace the six screws (M2x3) that secure the touch-pad board to the palm-rest assembly.
4. Slide the touch-pad bracket at an angle and align the screw hole on the touch-pad bracket with the screw hole on the
palm-rest assembly.
5. Replace the screw (M2x3) that secures the touch-pad bracket to the palm-rest assembly.
6. Adhere the tapes that secure the touch-pad board to the palm-rest assembly and cover the tapes with the transparent film.
7. Connect the touch-pad cable to its connector and close the latch.

Post-requisites

1. Replace the speakers.
2. Replace the system board.
3. Replace the display assembly.
4. Replace the I/O board.
5. Replace the hard drive.
6. Replace the wireless card.
7. Replace the memory modules.
8. Replace the base cover.
9. Replace the keyboard.
10. Replace the optical drive.
11. Replace the battery.
64 Replacing the touch pad
Replacing the touch pad
computer. After working inside your computer, follow the instructions in
44
After
www.dell.com/