NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1. Remove the battery.
2. Remove the
optical
drive.
3. Remove the keyboard.
4. Remove the
base
cover.
Procedure
1. Remove the screw (M2x3) that secures the wireless-card bracket to the system board.
2. Slide and remove the wireless-card bracket.
3. Disconnect the antenna cables from the wireless card.
4. Slide and remove the wireless card from the wireless-card slot.
5. Peel off the tape that secures the antenna cables to the system board.
28
Removing the wireless card
Removing the wireless card
computer. After working inside your computer, follow the instructions in
15
After
www.dell.com/